How to Replace Broken Garage Door Springs Kettering OH
After you have checked to make sure the door is balanced and all things are tight and in place it is time to reconnect the door opener again. It is easy to replace broken garage door springs Kettering OH on your own but you do need to make sure that you are doing it very carefully because it can be a dangerous repair job if not done correctly.
The door in the garage is important for the protection and safety of the family. Its also the place where you park your car and a common entrance into the home.
Wind the unbroken spring off and unfasten the bolts securing the torsion cones and spring bracket together, and then remove the bolts. Once you have completed this step in your broken spring repair project it is time to replace the spring along with re-install the hardware.
Look closely at the broken garage door spring and the new one to make sure that they are both the same. When you replace broken garage door springs in Kettering OH, avoid grabbing them by the spring. You need to do this because it helps you to make sure you have garage doors that are level when you have finished the broken spring repairs and installed the unbroken springs.
The most important step that a person needs to remember is to make sure that you have turned off the power to the garage door so you do not get electrocuted while making the repairs. You need to make sure that you disconnect garage door opener power cord along with disconnecting it from your garage door. This is for the newer doors installed in the garage as with the older versions you may need to turn or remove the fuse off the circuit break to turn off the power.
When you have broken garage door springs that need to be repaired you can either call a professional to repair them or you can do them yourself. Following the steps will help to ensure it will be easy when you replace broken garage door springs Kettering OH.